Extrusion welder with 2.2 kg/h output, 3100W power, for PE/PP/PVDF rods.

High-output 3500W welder for PE/PP/PVDF rods, 3.2 kg/h capacity

High-capacity extrusion welder, 4 kg/h output, PE/PP, 3500W power

Industrial extrusion welder, 4000W, 5 kg/h output for plastic rods.

Industrial-grade extrusion welder, 4200W, 6.2 kg/h output capacity

High-output handheld extruder for welding PE, PP, PVDF up to 20 mm thick.

Handheld extruder for PE, PP, PVDF with 3.2 kg/h output on 30 mm sheets.

High-output extrusion welder for PE, PP with Ø5 mm rod, 4 kg/h rate.

Precision extrusion for PE, PP, PVDF rods 0.3–4 mm, output up to 1 kg/h.

Durel hot air gun 230V, 2000W, 20–620°C range, brush motor, noise ≤65 dB

Hot air gun 2000W, 230V, temp 20–620°C, 180 L/min airflow, overheat protection

Hot air gun 2000W, 230V, temp 20–620°C, 180 L/min airflow, overheat protection

High-power 3400W hot air gun, 230V, ideal for plastic welding.

Powerful 3400W hot air gun at 230V for controlled plastic welding heat

Micro heater 550-770W, 120/230V, 650°C max, ultra-compact Φ21.5mm design.

Modular heater 1-3.3KW, multi-voltage, 650°C, S/L versions, 3 control modes.

Compact heater 2-3.3KW, multi-voltage, 650°C, fixed power, G3/8" thread.

Digital heater 2-3.3KW, multi-voltage, 650°C, potentiometer control.

High-power heater 2-5.5KW, multi-voltage, 650°C, Φ50mm body, G1" thread.

Heavy-duty heater 4.5-10KW, multi-voltage, 650°C, Φ62mm, industrial use.

Extended heater 4.5-10KW, multi-voltage, 650°C, 366mm length, Φ92mm body.

Compact heater 4-9KW, 3-phase, 650°C, space-efficient high-power design.

High-temp heater 5-11KW, multi-voltage, 600/900°C, X/Y series available.

Heavy re-circ 5.5-18KW, 3-phase, 600/900°C, X/Y series industrial capacity.

Industrial heater 15-24KW, 3-phase 400V, 600/900°C, X/Y mega-scale capacity.

Ultra heater 15-29KW, 3-phase 400V, 600/900°C, X/Y ultra-high capacity.

Maximum heater 15-60KW, 3-phase 400V, 600/900°C, flagship X/Y series.

Re-circ heater 5-11KW, multi-voltage, 600/900°C, closed-loop X/Y series.

Versatile test coupons for effective cathodic protection system verification.

Compact AC mitigation devices for effective interference and voltage control.

Robust Cu/CuSO₄ electrode for accurate potential readings on buried steel pipelines

Engineered coupons for consistent monitoring of cathodic protection parameters.

Automated DC tester for high-speed porosity detection in coatings and mouldings.

Wet roof leak detector for pinpointing faults in non-conductive roofing systems.

Microprocessor-based unit for safe, fast diathermy insulation fault detection.

Spark gap setter for accurate voltage calibration of PST100 and ST-AC100 units

High-voltage tester for detecting geomembrane leaks over large surface areas.

Lab Pro2 - unit only (excl handle and nosecone)

Quick AC spark tester (3–30 mm) for coating and joint inspection efficiency.

230 V spark tester for 3–30 mm coatings with reliable voltage and probe kit.

High-frequency AC spark tester for quick weld and coating integrity checks.

Reusable T-handle probe for reliable AC current density and corrosion evaluation.

Complete kit for verifying and certifying BathyCorrometer accuracy in-house.

High-voltage DC pinhole detector for fast, reliable coating and lining porosity testing.

IP65-rated DC pinhole tester for reliable fault detection in tough conditions.

50mm slip-resistant panels, studs/5-bar/orange peel, R10 rated, 11.3-12.1kg/m².

20-50mm PP/PE panels, 100x50mm cells, flexible sizing, 7.7-10.5kg/m², trailers.

50mm PP/PE panels, 50x50mm cells, superior strength, 2600x1000mm, 11.5-13.8kg/m².

Ventilated panels for airflow applications, lightweight structural design.

HDPE/PP/PVC saddle cutter Ø40–315 mm, fast setup, safe use

Electric band saws Ø up to 1702 mm, –45° to 67.5° PLC-controlled cuts for plastics

Electric band saw Ø up to 400 mm, –30° to 67.5° cuts for HDPE/PP/PVDF/PVC

Electric band saw Ø up to 630 mm, –45° to 67.5° cuts for HDPE/PP/PVDF/PVC

Precise, safe cuts Ø250–630 mm, 80 mm wall, 115/230 V jobsite saw

ALFA 1000: CNC pipe welder Ø355–1000 mm, USB data-log, high-pressure fittings.

CNC pipe welder Ø630–1200 mm, USB data-log, high-pressure fittings

CNC pipe welder Ø710–1600 mm, data-logging, USB, high-pressure welds

CNC fusion welder Ø24″–48″ IPS, 4000-cycle log, USB, high-pressure welds

Saddle fusion machine Ø315–630 mm, EASY LIFE control, USB data, hydraulic jaws.

HDPE/PP sheet welder 3– 100mm, 2 m width, hydraulic dual-pressure

HDPE/PP sheet welder 3–25 mm, 2 m width, hydraulic dual-pressure

HDPE/PP sheet welder 3– 50mm, 2 m width, hydraulic dual-pressure

CNC pneumatic sheet welder 3–50 mm, up to 3 m, DVS 2207 compliant, HDPE/PP/PVC

CNC pneumatic sheet welder 3–25 mm, up to 3 m, DVS 2207 compliant, HDPE/PP/PVC

CNC pneumatic sheet welder 3–50 mm, up to 3 m, DVS 2207 compliant, HDPE/PP/PVC

CNC pneumatic sheet welder 3–50 mm, up to 4 m, DVS 2207 compliant, HDPE/PP/PVC

CNC pneumatic sheet welder 3–30mm, up to 4 m, DVS 2207 compliant, HDPE/PP/PVC

CNC pneumatic sheet welder 3–50 mm, up to 4 m, DVS 2207 compliant, HDPE/PP/PVC